Preface

The Provenance repository is built on the work of many open source projects including the [Cosmos SDK]](https://github.com/cosmos/cosmos-sdk). The source code outside of the /x/ folder is largely based on a reference implementation of this SDK. The work inside the modules folder represents the evolution of blockchain applications started at Figure Technologies in 2018.

This project would not be possible without the dedication and support of the Cosmos community.

Contributing

Pull Requests
- PR Requirements
- Process for reviewing PRs
Forking
Dependencies
Protobuf
Testing
Branching Model
Release Procedure
- Creating a Release

Thank you for considering making contributions to the Provenance!

Contributing to this repo can mean many things such as participated in discussion or proposing code changes. To ensure a smooth workflow for all contributors, the general procedure for contributing has been established:

Either open or find an issue you'd like to help with
Participate in thoughtful discussion on that issue
If you would like to contribute:
1. If the issue is a proposal, ensure that the proposal has been accepted
2. Ensure that nobody else has already begun working on this issue. If they have, make sure to contact them to collaborate
3. If nobody has been assigned for the issue and you would like to work on it, make a comment on the issue to inform the community of your intentions to begin work
4. Follow standard Github best practices: fork the repo, branch from the HEAD of main, make some commits, and submit a PR to main
  - For core developers working on provenance-io, to ensure a clear ownership of branches, branches must be named with the convention {moniker}/{issue#}-branch-name
5. Be sure to submit the PR in Draft mode submit your PR early, even if it's incomplete as this indicates to the community you're working on something and allows them to provide comments early in the development process
6. When the code is complete it can be marked Ready for Review
7. Be sure to include a relevant change log entry in the Unreleased section of CHANGELOG.md (see file for log format)

Note that for very small or blatantly obvious problems (such as typos) it is not required to an open issue to submit a PR, but be aware that for more complex problems/features, if a PR is opened before an adequate design discussion has taken place in a github issue, that PR runs a high likelihood of being rejected.

Other notes:

Looking for a good place to start contributing? How about checking out some good first issues
Please make sure to run make format before every commit - the easiest way to do this is have your editor run it for you upon saving a file. Additionally please ensure that your code is lint compliant by running make lint. A convenience git pre-commit hook that runs the formatters automatically before each commit is available in the contrib/githooks/ directory.

Pull Requests

To accommodate review process we suggest that PRs are categorically broken up. Ideally each PR addresses only a single issue. Additionally, as much as possible code refactoring and cleanup should be submitted as a separate PRs from bugfixes/feature-additions.

Draft PRs can be used for preliminary feedback and to see the results of the Github action checks. They can also be used to better indicate that you are working on an issue.

PR Requirements

Before a PR can be merged:

All commits must be signed.
It must be up-to-date with main.
It must be approved by two or more maintainers.
It must must pass all required Github action checks.

The following are encouraged and may sometimes be required:

All Github action checks pass (even the non-required ones).
New Unit and/or integration tests have been written.
Documentation has been updated (in /docs or x/<module>/spec).
Functions and variables have accurate godoc comments.
Test code coverage increases.
Running go mod tidy should not cause go.mod or go.sum to change.

Process for reviewing PRs

When reviewing PRs please use the following review explanations:

LGTM without an explicit approval means that the changes look good, but you haven't pulled down the code, run tests locally and thoroughly reviewed it.
Approval through the GH UI means that you understand the code, documentation/spec is updated in the right places, you have pulled down and tested the code locally. In addition:
- You must also think through anything which ought to be included but is not
- You must think through whether any added code could be partially combined (DRYed) with existing code
- You must think through any potential security issues or incentive-compatibility flaws introduced by the changes
- Naming must be consistent with conventions and the rest of the codebase
- Code must live in a reasonable location, considering dependency structures (e.g. not importing testing modules in production code, or including example code modules in production code).
- if you approve of the PR, you are responsible for fixing any of the issues mentioned here and more
If you sat down with the PR submitter and did a pairing review please note that in the Approval, or your PR comments.
If you are only making "surface level" reviews, submit any notes as Comments without adding a review.

Forking

Please note that Go requires code to live under absolute paths, which complicates forking. While my fork lives at https://github.com/rigeyrigerige/provenance, the code should never exist at $GOPATH/src/github.com/rigeyrigerige/provenance. Instead, we use git remote to add the fork as a new remote for the original repo, $GOPATH/src/github.com/provenance-io/provenance, and do all the work there.

For instance, to create a fork and work on a branch of it, I would:

Create the fork on github, using the fork button.
Go to the original repo checked out locally (i.e. $GOPATH/src/github.com/provenance-io/provenance)
git remote rename origin upstream
git remote add origin git@github.com:rigeyrigerige/provenance.git

Now origin refers to my fork and upstream refers to the provenance-io version. So I can git push -u origin main to update my fork, and make pull requests to provenance-io from there. Of course, replace rigeyrigerige with your git handle.

To pull in updates from the origin repo, run

git fetch upstream
git rebase upstream/main (or whatever branch you want)

Please don't make Pull Requests from a main branch.

Dependencies

We use Go Modules to manage dependency versions.

Since most dependencies are not under our control, a third party may break our build, in which case we can fall back on go mod tidy.

Protobuf

We use Protocol Buffers along with gogoproto to generate code for use in Cosmos-SDK.

For determinstic behavior around Protobuf tooling, everything is containerized using Docker. Make sure to have Docker installed on your machine, or head to Docker's website to install it.

For updating the third_party .proto files, you can run make proto-update-deps command.

For formatting code in .proto files, you can run make proto-format command.

For linting and checking breaking changes, we use buf. You can use the commands make proto-lint and make proto-check-breaking to respectively lint your proto files and check for breaking changes.

To generate the protobuf stubs, you can run make proto-gen.

We also added the make proto-all command to run all the above commands sequentially.

In order for imports to properly compile in your IDE, you may need to manually set your protobuf path in your IDE's workspace settings/config.

For example, in vscode your .vscode/settings.json should look like:

{
    "protoc": {
        "options": [
        "--proto_path=${workspaceRoot}/proto",
        "--proto_path=${workspaceRoot}/third_party/proto"
        ]
    }
}

Testing

We expect tests to use require or assert rather than t.Skip or t.Fail, unless there is a reason to do otherwise. When testing a function under a variety of different inputs, we prefer to use table driven tests. Always use a slice for the test table (never a map). When iterating over the test cases, tc as the variable that holds the current test, e.g. for _, tc := range tests. Each test case should be run as it's own sub-test, e.g. using t.Run.

Messages should be provided for every assert and require. A message should reference the value being tested in the assert/require as opposed to the general purpose of the test as a whole. For example: err := DoThing(), good: require.NoError(t, err, "DoThing"), bad: require.NoError(t, err, "should not fail").

Branching Model

Provenance uses the trunk-based development branching model and semantic versioning (<major>.<minor>.<patch>).

The major version represents the version of the entire network. It will likely only change as part of a fork.
The minor version represents the features available. Changing to a new minor version involves an upgrade governance proposal.
The patch version represents features or fixes that can be added without affecting state.
Release candidates include -rc# at the end where the numbering starts at 1 (e.g. -rc1). Release candidates may not be state compatible with their predecessors.

Branches and Tags

Provenance uses the main branch for new features and fixes. It is not guaranteed that main will be compatible with the current Provenance blockchain networks.

A .x releases branch is made for each minor version. E.g. release/v1.12.x. A tag is created for each release. E.g. v1.12.0. To get a specific version, check it out by tag. E.g. git checkout v1.12.0 -b tag-v1.12.0.

Some older repos still use master instead of main but the two are treated the same way.

The main branch and all release/* branches are protected and can only be updated via PR. Branch protection might not be set up in all repos, but those branches should always be treated as if they were protected.

The latest state of development is on main.
Using --force onto a protected branch is not allowed (except when reverting a broken commit, which should seldom happen).
Protected branches must not fail make test test-race.
Protected branches must not fail make lint.
Protected branches should not fail any Github action checks.

Development Branch naming

In a main repo (e.g. provenance), the preferred branch name format is <user>/<issue #>-<short description>.
In forked repos under the provenance-io organization (e.g. provenance-io/cosmos-sdk), the preferred branch name format is prov/<user>/<issue #>-<short description>.

PR Targeting

All changes should target main. If a change is needed in a release branch, it should first be PRed to main then be cherry-picked and re-PRed to the release branch.

Development Procedure

Assign the issue to yourself and mark it as "In Progress" in any projects the issue is assigned to.
Checkout main and make sure it's up-to-date. E.g. git checkout main && git pull.
Create a development branch for your work using the development branch name format defined above. E.g. git checkout -b myuser/123-add-foo-feature.
Make changes and commit them. The suggested commit message format is [issue #]: <message>. E.g. git commit -m "[123]: Update changelog.".
Push up your changes.
Make a PR (possibly as a draft).
Repeat steps 4 and 5 as needed.
Mark your PR as "Ready to Review" (unless it's already that way).
Once the PR is ready (approved and all checks pass), it should be merged using the "Squash and Merge" strategy.

Release Procedure

Definitions:

A "major release" is one where the 1st number in the version string is increased. It usually has minor and patch versions of 0, but in some cases might not.
A "minor release" is one where the 2nd number in the version string is increased. It usually has a patch version of 0, but might not.
A "patch release" is one where the 3rd number in the version string is increased.
A "release candidate" is one that has -rc# at the end of the version string. These are usually not used for patch releases, but can be.
A "full release" is a release that isn't a release candidate.
A ".x branch" is a git branch with the format release/v#.#.x.
The primary Provenance Blockchain network is "mainnet".
The Provenance Blockchain network used for testing and integration is "testnet".

Git tags should only be used for releases. A release is automatically created by Github when a tag is pushed that has the format v#.#.# (where # is a whole number of any length). A release candidate is created if the tag has the format v#.#.#-rc#.

As of v1.13.0, release tags are created on the .x branches. E.g. on release/v1.13.x. Prior to v1.13.0, release tags were created on branches containing the full version string. E.g. release/v1.12.0.

For releases of forked repos (e.g. provenance-io/cosmos-sdk), the version should have the format <upstream version>-pio-# where <upstream version> is the version from the upstream repo that our version is based on. The -pio-# numbering should start at 1 and should restart when the <upstream version> changes.

The release cycle generally follows this pattern:

Create a new release candidate.
Test it locally. Go back to step 1 if issues are found.
Upgrade testnet to the release candidate.
Test using testnet. Go back to step 1 if issues are found.
Create the full release.
Upgrade mainnet to the full release.
Release patch versions as needed.

In some cases, a release candidate is not created before creating a full version. Either way, testnet will be upgraded to the new version before mainnet. For patch version releases, no upgrades are required or preformed.

Once mainnet has upgraded off of a version, that version is no longer supported.

Creating a Release

Summary:

Create a .x branch if needed.
Update changelog and release notes on the .x branch.
Create the new version tag.
PR the .x branch back to main.

1. Create a .x Branch if Needed

If a .x branch does not yet exist for the desired minor version, one must be created now.

In a main repo (e.g. provenance), the .x branch name format is release/v#.#.x.
In forked repos under the provenance-io organization (e.g. provenance-io/cosmos-sdk), the .x branch name format is release-pio/v#.#.x.

Start on main and make sure you're up-to-date, e.g. git checkout main && git pull.
Create the new .x branch, e.g. git checkout -b release/v1.13.x.
Push it to Github, e.g. git push.

2. Update Changelog and Release Notes

You will need to create a new development branch for this and PR it back to the .x branch.

The CHANGELOG.md on the .x branch must be updated to reflect the new release.

Run make linkify.
Add a horizontal rule and version section heading, e.g.
```
---

## [v1.13.0](https://github.com/provenance-io/provenance/releases/tag/v1.13.0) - 2022-10-04
```
This usually goes immediately under the ## Unreleased heading to indicate that all unreleased things are now released. There should be an empty line both above the --- and below the new version header.
If going from a release candidate to a full release, the release candidate entries should all be combined into one entry for the full release.
Optionally add an extra paragraph or two with general new version information. This should go below the newly added version heading but above any subheadings (e.g. ### Improvements).
Add a ### Full Commit History section at the end of the new version section with links to diffs between versions. E.g.
```
### Full Commit History

* https://github.com/provenance-io/provenance/compare/v1.12.0...v1.13.0
```
Note that the three dot ... diff is preferred over the two dot .. one for these links. For release candidates 2 and above, include links from both the previously released version and the previous release candidate. This should be the last section before the --- above the next version entry.

Now, create/update the RELEASE_CHANGELOG.md. For release candidates above 2, the existing RELEASE_CHANGELOG.md should be updated to include info about the new version at the top. For full or -rc1 releases, delete any existing RELEASE_CHANGELOG.md and start a new empty one.

Copy the lines from CHANGELOG.md starting with the new version header and ending on the blank line before the hr above the next version entry.
Paste them into the RELEASE_CHANGELOG.md.

Push up your changes and PR them to the .x branch.

3. Create the New Version Tag

Do the following locally.

Navigate to your locally cloned repo.
Make sure you've got up-to-date repo info. E.g. git fetch.
Checkout the .x branch and make sure it's up-to-date. E.g. git checkout release/v1.13.x && git pull.
Create and sign the tag. E.g. git tag -s v1.13.0 -m "Release v1.13.0".
Push the branch. E.g. git push.
Push the tag. E.g. git push origin v1.13.0.

You can then monitor the Github actions for the repo and also watch for the new release page to be created.

4. PR the .x Branch Back to Main

This PR should update the CHANGELOG.md and contain any changes applied to the .x branch but not yet in main. It should NOT contain the RELEASE_CHANGELOG.md file.

Do the following locally.

Navigate to your locally cloned repo.
Check out the main branch and make sure it's up-to-date. E.g. git checkout main && git pull.
Check out the .x branch and make sure it's up-to-date. E.g. git checkout release/v1.13.x && git pull.
Create a new development branch. E.g. git checkout -b myuser/v1.13.0-back-to-main.
Remove the RELEASE_CHANGELOG.md file.
Update your branch with main. E.g. git merge main.
Make sure the CHANGELOG.md correctly indicates the contents of the new release and still contains any unreleased entries.
Address any other conflicts that might exist.
Create a PR from your branch targeting main.

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

CONTRIBUTING.md

CONTRIBUTING.md

Preface

Contributing

Pull Requests

PR Requirements

Process for reviewing PRs

Forking

Dependencies

Protobuf

Testing

Branching Model

Branches and Tags

Development Branch naming

PR Targeting

Development Procedure

Release Procedure

Creating a Release

1. Create a .x Branch if Needed

2. Update Changelog and Release Notes

3. Create the New Version Tag

4. PR the .x Branch Back to Main

Files

CONTRIBUTING.md

Latest commit

History

CONTRIBUTING.md

File metadata and controls

Preface

Contributing

Pull Requests

PR Requirements

Process for reviewing PRs

Forking

Dependencies

Protobuf

Testing

Branching Model

Branches and Tags

Development Branch naming

PR Targeting

Development Procedure

Release Procedure

Creating a Release

1. Create a .x Branch if Needed

2. Update Changelog and Release Notes

3. Create the New Version Tag

4. PR the .x Branch Back to Main